Material testing standards according to EN, ISO and ASTM

Material testing standards according to EN, ISO and ASTM

ISO, ASTM and TAPPI standards

Material testing standards, including ISO standards, provide guidelines and specifications used to assess the mechanical properties of materials. These standards are critical for ensuring consistency and reliability in material usage and testing methodologies across various industries. The tests and procedures suitable for measuring different characteristics of materials, such as strength, durability, and other properties, are part of these standards. These tests are carried out with the use of universal testing machines.

Purpose of material testing standards

These standards are developed and published by well-known organizations such as ASTM (American Society for Testing and Materials), ISO (International Organization for Standardization), TAPPI (Technical Association of the Pulp and Paper Industry), and other entities. There are also regional and national recommendations like:

  • EN – Euronorm – European standards
  • DIN – Deutsches Institut für Normung, the German national standards organization

As these recommendations are harmonized, they are generally identical today. These bodies ensure the universal applicability and acceptance of these standards.

Material testing standards define testing procedures, equipment, sample preparation, specimen size, properties, and methods for evaluating results. These generally accepted testing methods facilitate the comparability of results.

Comparability is critical in almost any industry, including aerospace, automotive, construction, and medical devices, where material failure can have severe consequences. During the development of new materials or products, material testing standards provide benchmarks for evaluating new materials against existing ones.

All universal testing machines offered by Barrus Testing Systems comply with the testing requirements according to the ISO, EN, ASTM, and TAPPI standards mentioned below, as well as the recommendations summarized in ISO 75001 and ASTM E4 for universal testing machines.

For detailed information on compliance, please refer to our standards table and the detailed collection below.

 

Material

Method

ISO/EN Standard

ASTM Standard

TAPPI Standard

Metallic Materials

Tension Testing at Room Temperature

EN ISO 6892-1

ASTM E8 / E8M

-

Metallic Materials

Tension Testing - Method B at High Strain Rates

ISO 6892-2

-

-

Metallic Materials

Tension Testing at Elevated Temperature

ISO 6892-3

ASTM E21

-

Metallic Materials

Tension Testing - Testing in liquid helium environment

ISO 6892-4

-

-

Steel Products

Tensile, Bend, and Impact Tests

-

ASTM A370

-

Metallic Materials

Compression Testing at Room Temperature

ISO 7500-1, ISO 12107

ASTM E9, ASTM E209

-

Metallic Sheet Materials

Tensile Strain-Hardening Exponents

-

ASTM E646

-

Metallic Materials

Tensile Testing at Ambient Temperature

EN 10002-1

-

-

Metallic Materials

Bend Test

EN ISO 7438

ASTM E290

-

Metallic Materials

Calibration of Tension/Compression Testing Machines

ISO 7500-1

-

-

Steel for Concrete Reinforcement

Tensile Testing

EN ISO 15630-1

-

-

Plastics

Determination of Tensile Properties - Part 1: General Principles

ISO 527-1

ASTM D638

-

Plastics

Determination of Tensile Properties - Part 2: Test Conditions for Moulding and Extrusion Plastics

ISO 527-2

ASTM D638

-

Carbon and Alloy Steel Fasteners

Mechanical Properties of Fasteners

ISO 898-1 (Part 1: Bolts, screws, and studs), ISO 898-2 (Part 2: Nuts), etc.

ASTM F568M (for metric fasteners), ASTM A354, etc.

-

Metallic Materials

Compression Testing

-

ASTM E9 (for compression testing of metallic materials)

-

Plastics

Compression Testing

ISO 604

ASTM D695

-

Metallic Materials

Flexure Testing

-

ASTM E290

-

Plastics

Flexure Testing

ISO 178

ASTM D790

-

Cardboard Boxes

Box Compression Testing (BCT)

ISO 12048

ASTM D642

TAPPI T 804

Cardboard Boxes

Edge Crush Testing (ECT)

ISO 3037

ASTM D4727, ASTM D6653

TAPPI T 811, TAPPI T 838, TAPPI T 839

EN, ISO, and ASTM standards for polymers

ISO 527 standard
open

This testing method is developed to determine the tensile strength of molded and extruded plastics. The procedure according to the standard provides data on the material's resistance to tensile forces, helping to establish the structural properties of the material.


The standard consists of several chapters that detail testing standards for different types of plastics. Two of these chapters are:


ISO 527-1 Plastics: Determination of tensile properties
Defines the general principles of tensile testing for plastics and plastic composites.


ISO 527-2 Plastics: Determination of tensile properties
Part 2: Testing conditions for moulding and extrusion plastics

Includes methods for tensile testing of molded and extruded plastics.

ISO 604 Plastics: Determination of compression properties
open
This standard applies to the compressive testing of plastics, aiming to determine the compressive strength, modulus, and deformation of the material. It applies to various plastics, including semi-rigid and rigid, thermoplastic and thermosetting materials, and thermotropic liquid crystal polymers. The method uses standard test specimens, with special attention paid to their dimensions, testing speed, and conditioning. The standard does not apply to certain materials, such as composites reinforced with (cotton) fibersor cellular structures.
ISO 178 Plastics: Determination of flexural properties
open
Describes testing methods for determining the flexural properties of polymer materials. This standard is particularly important for evaluating the mechanical properties of plastics and composite materials.
ASTM D638 standard test method for tensile properties of plastics
open
ASTM D638 is a fundamental testing standard for determining the tensile properties of plastics, including tensile strength and elongation capabilities.
ASTM D695 standard test method for compressive properties of rigid plastics
open
This standard is used to determine the compressive properties of plastics.
ASTM D790 standard test methods for flexural properties of unreinforced and reinforced plastics and lectrical insulating materials
open
This standard prescribes two different test methods for determining the flexural strength and modulus of plastic test specimens. The procedures focus on uniformly loading the specimens, measuring flexural stress, strain, and other relevant properties.

ISO 527 standard: tensile testing guide for plastics

Understanding material testing standards can be challenging, especially when updates make compliance unclear. The ISO 527 standard is essential for plastic tensile testing, but navigating its details isn’t always easy. That’s why we’ve created a comprehensive ISO 527 PDF that breaks down the standard, covering testing methods, sample preparation, and compliance requirements. With our guide, you’ll have everything you need to interpret and apply the standard with confidence.

EN, ISO, and ASTM standards for metallic materials

ISO 6892 standard
open

This standard details the methods for tensile testing of metals, including steel, lead, copper, aluminum, titanium, and their alloys.


The standard has four appendices, each detailing testing procedures at different temperatures:


EN ISO 6892-1 Metals: Tensile Testing. Part 1: Testing at room temperatures


ISO 6892-2 Metals: Tensile Testing. Part 2: Testing at elevated temperatures


ISO 6892-3 Metals: Tensile Testing. Part 3: Testing at low temperatures


ISO 6892-4 Metals: Tensile Testing. Part 4: Testing in liquid helium environment

EN ISO 7438 standard: Metals. Bend testing
open
This testing standard details the evaluation of the deformability of metallic materials during bending.
EN ISO 15630-1 standard: Steel for reinforcement and prestressing of concrete. Test methods. Part 1: Reinforcing bars, rods, and wires
open
Includes methods for testing reinforcing bars and wires, determining mechanical properties such as tensile strength, yield strength, hardness, and bending ability.
ISO 898-1 standard: Mechanical properties of fasteners made of carbon steel and alloy steel. Part 1: Bolts, screws, and studs with specified property classes
open
Covers the mechanical and physical properties of bolts and other fasteners made of alloyed steel and carbon steel, as well as the testing procedures for them.
ASTM E8/E8M standard test methods for tension testing of metallic materials
open
The ASTM E8 standard is used to determine the tensile strength of metals. Its purpose is to provide accurate and reliable measurements of the mechanical properties of metals, such as tensile strength, elongation, and load behavior at room temperature.
ASTM E21 standard test methods for elevated temperature tension tests of metallic materials
open
This standard aims to define the procedures and requirements for tensile testing at high temperatures for metals and alloys. It provides information on mechanical properties such as tensile strength, elongation, and load behavior in high-temperature environments. This standard is essential for industries such as aerospace, power generation, and materials research, where metals need to withstand high temperatures.
ASTM E370 standard test methods for mechanical testing of steel products
open
This standard is used to determine the mechanical properties of iron and steel products. It provides detailed guidelines for performing various mechanical tests, including tensile strength, elongation, hardness, and impact resistance.
ASTM E9 standard test methods of compression testing of metallic materials at room temperature
open
Used for determining the compressive properties of metals at room temperature. It helps understand the mechanical behavior of metals under low-speed compression.
ASTM E209 standard test methods for compressive properties of metallic materials at elevated temperatures with conventional or rapid heating rates and strain rates
open
Standardizes the testing of aluminum and aluminum alloy susceptibility to hot-cracking. This standard plays a critical role in quality control during welding and casting processes of aluminum-based materials, helping to identify the susceptibility of materials to cracks during heat treatment.
ASTM E646 standard test method for tensile strain-hardening exponents (n-values) of metallic sheet materials
open
Used to determine the grain size of metals and alloys using extended Hall-Petch relationships. This standard provides detailed guidelines for measuring grain size, which is important for understanding the microstructure and mechanical properties of metals.
ASTM E290 standard test methods for bend testing of material for ductility
open
A well-defined testing standard established by ASTM International for evaluating the bending properties of metals and metal alloys.
ASTM F568M standard specification for carbon and alloy steel externally threaded metric fasteners
open
Defines requirements for mechanical fasteners, particularly metric-threaded steel bolts. ASTM F568M specifies the quality, mechanical properties, threading, dimensions, shape, and surface treatment requirements of bolts. It classifies bolts into different grades based on their strength characteristics, ensuring the use of appropriate grade bolts for various load and environmental conditions.
ASTM A354 standard specification for quenched and tempered alloy steel bolts, studs, and other externally threaded fasteners
open
​​

This standard specifies the requirements for the material quality and mechanical properties of high-strength steel bolts, specifically alloy steel bolts designed for high-load applications, such as structural fasteners, bridge construction, and heavy structures.


The ASTM A354 classifies bolts into two main classes, BD and BC, which differ in terms of material quality, strength, and hardness. BD classification bolts provide a higher level of strength than BC classification bolts and are recommended for higher load applications.

Guide to DIN EN ISO 6892 PDF: Metallic tensile testing

Ever felt lost in the world of material testing standards and compliance? No surprise there. Standards can be complex, and when updates occur, it’s not always clear what needs to change to stay compliant. That’s why we’ve identified the need for a detailed overview of the DIN EN ISO 6892 standard. We’ve created a comprehensive guide that includes everything you need to navigate the requirements and find exactly what you’re looking for.

ISO and TAPPI standards for cardboard-based packaging materials

ISO 12048 standard: Packaging. Complete, Filled transport packages. Compression and stacking test using compression tester
open
Details the procedures and requirements for the compression testing of packaging materials. It includes the shape and size of the samples, defining the testing environment accurately. The box crush test (BCT) is one of the most important packaging material testing procedures.
ISO 3037 standard: Corrugated fibreboard. Determination of edgewise crush resistance (non-wax edge method)
open
This standard includes testing methods to determine the mechanical performance and reliability of corrugated fiberboard. It describes tests such as the Edge Crush Test (ECT), which measures edgewise crush resistance.
ASTM D642 standard test method for determining compressive resistance of shipping containers, components, and unit loads
open
This standard evaluates the compressive performance of packaging boxes, containers, and packaging materials. The purpose of the standard is to define testing methods that measure the resistance of packaging materials under compression, including static and dynamic loads. It allows companies to evaluate the mechanical performance of packaging materials, especially against the loads experienced during shipping and storage.
ASTM D4727 standard specification for corrugated and solid fiberboard sheet stock (container grade) and cut shapes
open
Defines specifications for corrugated fiberboard sheets and sheet products, particularly for packaging applications. The standard includes the basic physical properties of corrugated fiberboard sheets, such as thickness, strength, size, and material composition requirements.
ASTM D6653 standard test method for determining the effects of high altitude on packaging systems by vacuum method
open
This standard evaluates the gas permeability of packaging materials, particularly under the influence of changes in air pressure and temperature. The standard describes the testing methods that evaluate the performance of packaging materials that protect packaged products under various environmental conditions, such as high-altitude pressure changes and temperature fluctuations.
TAPPI T 804 standard: Compression test of fiberboard shipping containers
open
TAPPI T 804 is a testing standard developed by the Technical Association of the Pulp and Paper Industry (TAPPI). This standard applies to testing the compressive resistance of corrugated fiberboard packaging and containers. TAPPI T 804 details procedures for performing box crush tests, including sample preparation, testing equipment specifications, load application, and result evaluation. The box crush test (BCT) is one of the most important packaging material testing procedures.
TAPPI T 811 standard: Edgewise compressive strength (ECT) of corrugated fiberboard and width
open
The standard aims to provide standardized testing conditions for the edgewise compressive testing of corrugated boxes, where the boxes are compressed vertically to determine their maximum load-bearing capacity. It describes tests such as the Edge Crush Test (ECT), which measures edgewise crush resistance.
TAPPI T 838 standard: Edgewise compressive strength (ECT) of corrugated fiberboard using the clamp method
open
This standard evaluates the opening resistance of corrugated boxes and containers. It measures the force required to open the top or bottom flaps of a corrugated box, which is an important characteristic for the ease of handling the packaging.
TAPPI T 839 standard: Edgewise compressive strength (ECT) of corrugated fiberboard using the pin method
open
This standard measures the closing strength of corrugated boxes and containers. TAPPI T 839 aims to determine the force needed to open or tear the flaps or other closing elements of corrugated boxes and containers.

Verification of testing machine calibration: ISO 7500-1 standard

This testing standard aims to define the calibration and verification of tensile and compression testing machines accurately and uniformly. The standard also addresses the verification criteria for the accessories of the equipment, which can also affect the reliability of the measurements.

Logo

Contact us

Looking to enhance your material testing process?

We’re here to help.

Contact our expert team for immediate support in English, German or Italian.

Exceptional precision - Fair price